Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have LED indications or key fobs and is hidden within the wiring of the vehicle.
The user can also disable the system temporarily using Transport Mode when renting out their car. This guide will guide you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a PIN code that you choose. It is inaccessible to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled through circuit cuts.
The system is simple to use, however it's important to have professional installation to ensure a secure and secure connection to your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the security package for your vehicle.
To avoid the accidental deployment of short circuits or airbags The installer must first disconnect your battery. After the battery has been disconnected, the installer can start working safely. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to verify electrical values. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. The user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
During the installation process, it's important to choose an area for grounding that is free of paint and debris. The installer should be sure that the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. Depending on the model, these wires may need to be soldered or plugged in. A quality connector is recommended to ensure a long-lasting and reliable connection.
After the installation is completed, the customer can activate the Transport Mode. This allows mechanics or valet parking to access the vehicle without knowing the pin code. To do this, the customer has to hit the service button on the dashboard five times in a matter of 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent option for those who regularly rents out their vehicles on platforms like Turo. An immobiliser can cut down on the cost of insurance, as it reduces the risk of theft.
Getting Started
You won't have a problem with an autowatch ignition device in order to guard your car from thieves. The device protects your vehicle from being started even the theft or copies the key. This is due to its advanced technology that is designed to prevent the car's engine from starting without the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence that only you know which makes it impossible for someone else to start your vehicle. This is the best way to protect your pride and joy. It will not lose its value if you ever want to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and malfunctions in the system. You must first locate a 12V power supply and a solid grounding on the chassis of your car. After that, you can begin to connect the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a strong connection. Also, be sure to cover the connections by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other issues.
After the wires have been connected, you can connect the battery and start the engine to test the function of the immobiliser. If everything is functioning properly then you can put it in a safe location beneath the dash or anywhere else in the vehicle. Make sure to cover it well to ensure that thieves cannot alter it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it is in compliance with the highest standards of security and is a fantastic protection against car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and it cannot be disabled without knowing the code. The device is simple to use, and can be set to a service valet setting so that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. Ghost Immobiliser doesn't interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and drive off with peace of mind.
Once installed, the Ghost Immobiliser guards your vehicle from hacking or key cloning while protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to hand your car over for service or valet park.
To complete the Ghost Immobiliser installation, you'll have to identify a source of constant power (12V) and a grounding point. Make sure both are well-insulated and can be touched. It is also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of theft by thieves. To avoid committing mistakes, double-check these points and mark them using the use of tape or labels. Verify all connections for signs they are wearing out. cost of ghost immobiliser that are loose can cause system malfunctions, so be certain that they are securely fixed and well-insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will ensure that the unit is operating correctly and that all connections are safe and well-insulated. If there are any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your car's ECU to prevent unauthorised motor starting. Its cutting-edge technology safeguards your vehicle from key cloning and hacking and other common tactics that thieves employ to steal vehicles. The Ghost also works in conjunction with other alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unique features and discreet design make it a preferred option for car enthusiasts and security-conscious drivers alike.
It is essential to follow the procedures for installation to ensure correct integration of the Ghost Immobiliser. The best place to start is to consult the wiring diagram for your vehicle, which will serve as a guideline for locating and connecting the wires required. After that, you'll need determine the power source and grounding points. Once you've found them, you'll be required to mark them so that they're easily identifiable during the installation process. Finally, it's important to use top-quality tools and materials. Basic hand tools can assist you in making precise connections. A multimeter will verify electrical values, and ensure safety. Insulation tape and cable ties will help keep all connections neat and tidy. Additionally, a user's manual will give specific guidelines specific to your Ghost model.
Before beginning the installation, it's important to test the system by entering the PIN code and starting the vehicle. This will ensure that the immobiliser is working as it should and prevent unauthorised vehicle starts. This procedure should be carried out regularly as part of your routine inspections of the vehicle to ensure that the system is always working correctly.
Once the installation has been completed, you are now able to start driving your car with confidence. The Ghost will guard your pride and joy from potential car thieves. It will ensure that no one will escape with your car even if they don't have the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts to steal or tamper with. This lets you track your vehicle if it is stolen.
The Ghost is compatible with a wide variety of automobiles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to learn more about our services and installation options. We are a TASSA Installer who is registered which guarantees that we follow strict guidelines and procedures for installing our products. This assures customers insurance companies, customers, and law enforcement agencies that installations are done safely and properly.